Site Information

shop by Category


 Loading... Please wait...

Air Compressor/Generator/Welder Combo for Service Trucks

0.00 LBS
$250.00 (Fixed shipping cost)

Product Description

We are proud to announce we now represent the Full Line on Mi-T-M Equipment

Please read this, We ship these direct from the factory, Allow up to 10 days to arrive, they are 5 days behind in shipping

Stationery Model AGW Series-Air Compressor/Generator/Welder Combination for Service Trucks, Shops, Farm

Quality Cast Iron Two Stage Compressor with venting system for reduced crankcase temperature & pressure

Industrial 5000 Watt Generator with one L14-20R and two NEMA5-20R receptacles

The adjustable welding amperage has a maximum rating of 170 amps and features control settings with a minimum/maximum switch for precise amperage selection


Generator Mode, AC Current Only, Selector switch set to idle down, engine will idle down when generator is not is use and tank pressure is 175 PSI, Swithc is set to full throttle, engine will run full throttle continuously

Welder Mode, DC Current Only, engine must be running full throttle, Selector switch must be set to full throttle

Engine, Performance proven engine with low-oil shutdown,Includes Electric Start, ( battery & cables NOT included)

Compressor Pump, Splash lubricated cast iron crankcase to extend the hours of performance.Cast iron head for heat dissipation,Durable stainless steel braided discharge hose for longer life

Generator, Brush type 2 pole 120v/240V alternator, total harmonic distortion (THD) less than 6%25, 100%25 copper windings

Welder, Amperage selection switch, 170 maximum

Frame, Powder coated ASME coded 30 gallon receiver tank, 3/16" base plate to reduce vibration, 14 gauge powder coated two piece belt guard with 1/4 turn release for quick access to belts

Components, Belt tightening system pulls engine straight to ensure constant belt alignment, Manual drain valves for proper maintenance, regulator and two gauges for tank and outlet pressure, 16.5" fly wheel for extra cooling and longer life, Quality pilot valve unloader.

Specs:Engine 404Cc Subura OHC

Rated speed 3600 RPM

Compressor:16.3 CFM @ 100 SPI, 15.7 CFM @ 175 PSI

Tank:30 gallon receiver

Generator:5000 Watts Max AC Output, 4500 Watt AC Output

Alternator Wattage:3000 watts @100 PSI, 2500 watts @ 175 PSI

Frequency Voltage:60Hz/120V/240V

Max Amps:41.7/20.8 off-load

Cont Amps:37.5/18.7 off-load

Receptacles:(2) 120V, 20A GFCI duplex, 120V/240V 20A Twist lock

Welder:Duty cycle 10 min run time 105A @ 100

DC Voltage:50-170A working range

Dimensions 46" x 22" x 47"

Net wt 585 Lbs

Ship weight 650 lbs

Optional Accessories:Engine oil drain $42

Equipment Cover $178

Battery tray, box & cables $90 not to be used if truck mounted

Vibration Pads $150.

Does not include any hoses, cables, welding cables,fitting, etc


Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category